The Maintenance of Oxy Hydroxide Machine
2014-11-03The Maintenance of Oxy Hydroxide Machine:
1. When a long time, turn off the power, the release of the residual gas inside the machine.
2. Continuous time 1000 hours or electrolyte when dirty, replace the electrolyte. h2o generator Rinse with clean water and then configure the electrolyzer 25% KOH electrolyte is added to the electrolytic cell.
3. If during use, additives tank plus alcohol and other additives, plus the day should maintain the principle of the day poured, avoid alcohol, hho generator for car cell expansion and contraction due to the negative pressure will cause the tank back into the alcohol cell, resulting in failure of the electrolyte. Electrolyte failure detection method is the flame is blue and the flame weakness.
4. oxyhydrogen generator. Under thunder weather conditions, do not use, so as not to damage the electrolysis power supply.
5. When the machine gun fire while high pressure airless, it could be a flame arrester or gun fire retardant core obstruction, used warm water to soak five minutes, and then took over again after drying water use can be.