(1) gas and oxygen flame size adjustment: Gas attempting tipping frame fixed column can be adjusted up and down and back and forth fixed, the air tank of gas and oxygen, respectively, by two groups cutting needle to adjust and control the size of their attempting to send mixer to thoroughly mix with each other, and then there were a group attempting to enter the preheat attempting another group attempting brushed into attempting.

(2) attempting the ampoule position, approximately between 12 mm more appropriate, preheat attempting to adjust to the ampoule bottleneck segment is reddish, then light drawing machine attempting to melt sealing drawing, drawing good or bad seal on the device and adjust attempting the regulation side, must be carefully adjusted to the flame, in order to carry out the normal operation. In operation, always pay attention to attempting changes at any time to adjust.

(3) vaporization of gasoline and air flame size adjustment: Gas attempting to grow Antonov fixed column can be adjusted up and down and back and forth fixed, the air tank, the hybrid gasification gasoline, after a certain air mixture ratio, respectively, by two groups needle-shaped cutting regulation and control their head size, into a group attempting, preheat attempting another group attempting to enter the drawing attempting.

(4) attempting the ampoule position, between about 28 mm more appropriate. Preheat attempting to adjust to the word BU cervical reddish, then by drawing machine attempting melting chemical process, drawing seal, if attempting differences can be finely adjusted, corrected, drawing good or bad, on the means for adjusting and regulating associated fire decor, must be carefully adjusted to the flame, in order to carry out the normal operation, in normal operation, always pay attention to changes in oil content, at any time to adjust the ratio regulator device. To Wuxi Wonder-Machinery seeking will be used in the gasification gas regulator filter removed, often put the oil bottle. A few days ago containing high amounts, should be added to the appropriate air and anti-air support to ensure that the flame temperature is normal.

Previous--Next