Kingkar brown gas carbon cleaning uses exclusive worldwide 32 microcomputer control system, easy to operate, user-school that will.

Step 1: hydrogen car trachea trachea and connect, disconnect the car at this location, and the vacuum tube hydroxide connected.

Step 2: Fuselage with two valves, close the valve 1, open valve 2.

Step 3: Start the car's engine.

Step 4: Select the carbon cleaning mode (gasoline) and set a good time, the system will automatically save the carbon cleaning time, next time do not need to set the time in addition to carbon. When you press F4 to adjust the settings of time, minutes, seconds, press F3 and F2 changes in carbon cleaning time setting (F2 increased carbon cleaning time, F3 reduce carbon cleaning time), press F1 to confirm the setting is completed.

Step 5: Open the valve 1, the system automatically recognizes the engine has started to begin carbon cleaning, carbon cleaning countdown display.

Step 6: You can rotate the gas production adjustment knob clockwise to turn up the gas production, gas counterclockwise tune miscarriage, (usually set to 1500L). In the carbon cleaning process, we can see that the carbon in the manner of gaseous and liquid discharge.

Step 7: Display countdown to zero, the system automatically stops gas production. After a short time, when the air pressure inside the machine to zero, the machine rings indicate end carbon cleaning. A closed valve and open the valve 2.

Step 8: The car accelerates at idle to 4000 rpm, repeated five times, you can see the exhaust deposits.

Previous--Next