1, under normal circumstances, every six months after using the machine in the liquid electrolyte to put out new ones. Such work (gas production unchanged) the maintenance once a year.

2, periodically check whether the machine loose fittings or air leaks.
Methods: simply close the gas valve with gas equipment or directly block the rear panel of the outlet pressure gauge pointer to overvoltage set value, usually (0.19Mpa), whether it will fall to 5 minutes. If yes, then the machine has a leak; if not, then use the machine properly, there is need to re-tighten the seal air leaks.

3, often with dry compressed air to clean the power and machine.

4, regularly check the machine solenoid switch case, that when added to water, lights it, add water solenoid valve if there is a normal magnetic phenomenon.

Previous--Next