1, HHO Welding for the first time you need to configure the electrolyte, when the air pressure is not enough, you can just add water. Recommended updated every three months or so, and better results.

2, Oxy hydrogen welding canister when adding water or alcohol, you must first extinguish the torch of fire, and then use the remaining gas discharge port machine gun inside, after determining the gas within the machine completely discharged before unscrewing canister operation .

3, If the water in the hose can cause yellow flame, should be discharged.

4. Check hose connections shall not leak.

5, HHO Welding above do not place any metal objects and liquids, in order to avoid short circuits and other security problems.

6, Oxy hydrogen welding during commissioning and electrolyte replacement, please do security. Electrolyte is non-toxic, but is corrosive to skin and eye burns force, if accidentally touched, immediately rinse with water.

Previous--Next