1, Turn on the power switch, the system enters standby mode.

2, should prompt the dosing device rings, please use the machine top cover assembly wrench to unscrew the cap plus liquid, slowly adding the liquid; Should the user interface displays the status of normal, what is displayed as follows: operating normally, F1 key to start the work. This means that you can start working.

3, must bear in mind that close the valve, then the machine will be connected with the car's trachea tube.

4, start the car engine.

5, open the valve, the system automatically detects that the engine has been started, automatic start working interface work time starts counting down.

6, when the working hours of the countdown to zero pressure 00:00:00 and the machine, the operator interface display end of the work, and the user is prompted to ring the maintenance operation is complete.

7, close the valve, press the F1 key, the system stops ringing.

8, the car is turned off, the car engine vacuum recovery position.

9, restart the engine at idle to 4000 rpm refuel the car, after the end of the maintenance operation is repeated four times.

Previous--Next