1, first check before starting the electrolyzer and security seal level is within a predetermined range, each pneumatic valves are open. Cell level should be between the upper and lower mark. Security seal level should be in the view of the liquid pipe off the assembly line more than 10 cm. ʱ??

2. Open button switch to start the machine, clockwise rotating knob until the current regulating electrolysis current ammeter indicated reaches the required value 200A-240A before normal use. ʱ??

3, the machine starts to observe the pressure gauge should only lit the torch between 0.05MPa-0.08MPa. If you can not burn the torch temper phenomenon, you should check whether the muzzle tighten or damage, pipeline leaks, whether there is water gun. If you have these problems should be treated before use. ʱ??

4, should be opened after the shutdown bleed valve behind the machine, let go of the residual gas. Operating workers can use caster maintenance time security seal flushing and changing the water. ʱ??

5, in case the machine is less than the current tone 200A, the voltmeter shows this occurs at 120V or more, should be either within the cell to make potassium hydroxide 5Kg. ʱ??

6, electrician, mechanic should be inspected daily operational status of equipment, identify problems in time. Class should be cleaned of dust and dirt equipment and hydroxide occurs inside the station, with the stable operation of the workers proper use and maintenance of hydrogen generator.

Previous--Next