Brown Gas Apply to Waste Incineration Test
2015-09-10
The Brown gas (oxyhydrogen) catalytic combustion technology used in the processing capacity of 2800t / y of two QNK-15 gas controlled thermal pyrolysis incinerator, gas catalytic process transformation through the control of gas furnace Brown, incineration of medical waste production test. After six months of use, and achieved good results.
(1) Brown gas so that the control of gas incinerator CO oxidation reaction rate significantly faster, CO is converted to CO2 reaction activation temperature reduced by about 150 ℃, significantly improve the combustion efficiency of the incinerator.
(2) the total amount of gas added Brown and incinerator flue gas volume ratio of even less than a million, can significantly change the state of the incinerator combustion and reduce smoke emission levels; while Brown gas furnace wall has adsorption which lagged effect is obvious.
(1) Brown gas so that the control of gas incinerator CO oxidation reaction rate significantly faster, CO is converted to CO2 reaction activation temperature reduced by about 150 ℃, significantly improve the combustion efficiency of the incinerator.
(2) the total amount of gas added Brown and incinerator flue gas volume ratio of even less than a million, can significantly change the state of the incinerator combustion and reduce smoke emission levels; while Brown gas furnace wall has adsorption which lagged effect is obvious.
(3) The actual medical waste incineration in the production process, using Brown catalytic combustion flue gas emissions can be reduced by about one-third of the total.
