1. Process applicability

Hydroxide flame temperatures up to 2800 degrees, and the flame focus on good, sealing speed. And because hydrogen flame only clean water generated during combustion, there is no contamination of the drug. Drawing water injection hydroxide flame sealer is not stored gas, produced side by side, on-demand manufacturing, supply pressure is lower than 0.2Mpa, and therefore safe to use than conventional gas.

Hydroxide flame when drawing seal, no longer need the gas bottle, do not need oxygen bottles. Therefore, companies no longer need to buy any gas outward, reducing management costs.

Hydrogen is very light, once the leak will automatically outward escape, there will be a security risk. The gas will be gathered in a room, it will lead to human poisoning, and explosion risks.

2. Feasibility of technological transformation

When using hydrogen instead of the traditional flame sealing process gas required for the gas, just add water injection hydroxide flame sealer drawing, the generated hydrogen gas into the gas pipeline before the end of the installation of the sealing machine hydroxide flame arrester, while attempting to replace the existing gas hydroxide head to fireworks.

In general, a water injection hydroxide flame sealer can take a drawing to multiple sealing machine. According potting pin number and capacity as well as the required number at the same time with a potting machine to select the model.

Previous--Next