1. Why should water welder install automatic gas regulator?
       When the water has a volume knob welder, such as adjusted to 2000L / h, so, if only a few people use, the gas generated by the machine ever use (ie when gas production is set larger than gas consumption), water welding machine stops automatically when the pressure rises to 0.2Mpa gas production and gas production fell to automatically start when 0.16Mpa, this time, the pressure will fluctuate, workers will feel the flame suddenly increases, all of a sudden becomes smaller.
       If set to 2000L / h, it is perfect for 20 people to use, but if more than 20 people over the use, would appear not enough firepower, (that is, less than gas consumption set gas production), this time to have to go Water welder next transfer large gas production. Workers will feel very troublesome. If gas production is set to the maximum gas consumption will be less than the gas production this to happen.

So, we need automatic gas regulator.

 

2, Walker Energy Water welder gas automatic regulator principle:

       Role Walker Energy Water welder gas automatic regulator that simulates human behavior, if you feel small volume, it will automatically transfer large gas production, if large gas volume is automatically adjusted miscarriage. It is always in the regulation by the microcomputer chip gas production. Therefore, it can ensure that the pressure of gas output is stable as long as the pressure is stable, then regardless of a few people use, the flame is stable.

       For example, a person is not required to use when gas demand is large, then it is automatically adjusted miscarriage gas, increase the number of people with time, a large number of gas demand, it will automatically transfer large gas production, if there are more people in the use, which in turn was a little bigger gas production adjustment. If the way a few people stopped using, it will automatically adjust the gas production smaller.

       Another example is someone you need to fire the big guns of the valve opening point, it detects pressure drops a little, it will automatically tune up a little gas production.

Previous--Next